UKOOA and the EPSG have been working together for many years. Through their collaboration, they have developed many standards and UKOOA has been open to listening to the industry about positioning in the North Sea.
When seismic data is acquired, whether it be 2-D or 3-D seismic surveys, the shotpoints (energy source, common mid-point, etc.) need to be positioned or referenced on surface. Over the years UKOOA has developed various formats, named via a version and a year.
This is a short introduction to how these files describe positions in the oil and gas industry.
UKOOA P1/90
Information is described in the Header for the file.
The Header records following the convention listed below:
Record Identifer "H" Column(s): 1 Format: A1
Header Record Type 2-3 I2
Header Record Type Modifier 4-5 I2
Parameter Description 6-32 A27
Parameter Data 33-80 Varies
Using the above as a basis, let us take a look at how Datum and Spheroid information is described in this file.
Header records H1600 and H1601 are required for Datum Transformation parameters used by the Bursa-Wolfe Transformation.
Reviewing the Bursa-Wolfe Transformation (as vectors), we see the following:
X DX 1 -RZ +RY X
Y = DY + SCALE * +RZ 1 -RX *
Z DZ -RY +RX 1 Z
where
X,Y,Z are geocentric cartesian coordinates defined in metres
DX,DY,DZ are the translation parameters defined in metres
RX,RY,RZ are clockwise rotations defined in arc seconds,but are converted to radians for use in the formula
SCALE = [1+S. (1oe-6)] where S is in parts per million
The Vertical Datum, is identified by Header record H1700.
Some examples of the vertical datum, in relation to offshore work are:
LAT - Lowest Astronomic Tide
MSL - Mean Sea Level
SL - Sea Level
ES - Echo Sounder
The units of measurement are specified in H2001.
These should be consistent with the position data.
The height unit code will be 1 for metres, 2 for any other unit of measure.
Header H2002 specifies the Angular unit code to 1 for degrees, 2 for grads.
Projection Data is specified in Header records H1800 to H2509.
Currently, in this older format, the following projection codes were defined and used.
001 - UTM Northern Hemisphere
002 - UTM Southern Hemisphere
003 - Transverse Mercator (North Oriented)
003 - Transverse Mercator (North Oriented)
004 - Transverse Mercator (South Oriented)
005 - Lambert Conic Conformal with one standard parallel
006 - Lambert Conic Conformal with two standard parallels
007 - Mercator
008 - Cassini-Soldner
009 - Skew Orthomorphic
010 - Stereographic011 - New Zealand Map Grid
999 - Any other projection or non-standard variation of the 11 listed above
Since this initial positioning file was developed with the help of surveyors, they planned ahead and answered the question: What happens when we cross the Equator?
When a survey crosses from the South to the North, and the whole survey is shot on a Southern Hemisphere UTM Zone, the coordinates will possibly exceed 9,999,999.9. This is not acceptable in the P1/90 format, so Header record H2600 must indicate that 10,000,000 must be added to the co-ordinates.
More detail about this specification can be found here.
As the industry matures, new versions were released, the next in 1994. This was called P2/94 and was derived for raw marine positioning data.
UKOOA P2/94
During this time, differential positioning with GPS was just being implemented and the industry was beginning to rely on this technique more and more for offshore surveying.
This format is based on UKOOA p2/91 and has extended many of the definitions needed for differential GPS.
As operators maintain and store data in these formats, P2/94 also acts as an archiving format and records information such as the satellite ephemeride, ionospheric conditions and weather/meteorological conditions of the survey.
With the move to P2/94, Geodetic information moved to new headers, and are such described as:
H0100 Magnetic Variation - General Information
H0101 Magnetic Variation - Grid Data
H011# Datum and Spheroid Definitions
where # = 1..9 and is the datum & spheroid number
H0120 Seven Parameter Cartesian Datum Shifts
H0130 Other Datum Shift Parameters
H0140 Projection Type
H0150 (Universal) Transverse Mercator Projection
H0160 Mercator ProjectionH0170 Lambert Projection
H0180 Skew Orthomorphic & Oblique Mercator Projection
H0160 Mercator ProjectionH0170 Lambert Projection
H0180 Skew Orthomorphic & Oblique Mercator Projection
H0181 Skew Orthomorphic & Oblique Mercator Projection cont.
H0190 Stereographic Projection
H0199 Any other ProjectionSatellite System Definitions
H600# Satellite System Description
H610# Definition of Differential Reference Stations
H620# Satellite Receiver Definition
H6300 GPS parameter recording strategy
H6301 DGPS differential recording strategy
H631# GPS clock and ephemerides parameters
H632# GPS ionospheric model & UTC parameters
H6330 Meteorological parameters
H65## DGPS differential correction source defn
H66## DGPS differential correction source defn
H67@0 GPS ellipsoid height estimate
Rotation Conventions
Note that 2 different conventions are in use in the survey industry for defining rotations. This has led to considerable confusion in the GIS and mapping world.
Both are valid when used properly.
The two conventions can be referred to as:
1) Position Vector rotation (Commonly used in Europe and referred to as the Busra-Wolfe)
2) Coordinate Frame rotation (Commonly used in North America)
More detailed information about the P2 format can be found here.
UKOOA P5/94
This version came along to facilitate the exchange of position data for pipelines, flowlines, umbicals and power cables offshore.In these cases, the data required for pipeline positions are the Latitude, Longitude, Easting, Northing, Depth, and Kilometre Point (KP), along with the standard datum and map projection parameters.
Without wanting to bore my readers with more H records, you can found out more about how the pipelines are stored in this format here.
UKOOA P6/98
In 1998, a new version was developed for 3D seismic surveys and binning.
This is quite complex and would make this short blog even longer, so I'll write about this format at a later date.
The main emphasis of this blog, though, is to show how formats can change over time as technology and data sharing increases. It also points out the importance of knowing the format of your data, especially if you are doing historical work over a region - do not always assume a specific data format.
UKOOA P7/2000
Well's deviate. With the advent of horizontal wells and sidetracks, and relating to seismic surveys, we enter a whole other story again.
In this story, as well (bad pun!), we have to consider height measures (such as Kelly-Bushing), and the 4 Norths (which I will explain on a later post).
As this file type would make this blog even longer, I'm going to jump ahead to what the EPSG and UKOOA are doing now in defining the Header records for this specific part of the oil and gas industry.
How the EPSG comes into Play
Turning our eyes to the EPSG in P formatted files, we want to enable integrity checking of co-ordinate system definitions in UKOOA P1, P2, P5 and P6 formats, so a provision is made to describe co-ordinate system by reference to the European Petroleum Survey Group (EPSG) database of geodetic parameters.
This is the group of codes we see in use throughout the GIS field and in products such as ESRI and PROJ.4.
What this allows UKOOA to do is to adopt an industry-standard name to be quoted where the geodetic co-ordinate system used is a common system. Defining parameters and units are then as given by EPSG and are not strictly required to be explicitly given in the P-format records.
As an integrity check, it is considered good practice also to include the explicit definition.
The new records which can be used as extensions within the P1/90, P2/94, P5/96 and P6/98 formats are:
H8000 EPSG Geographic CS Name
H8001 EPSG Geographic CS Code
H8002 EPSG Projected CS Name
H8003 EPSG Projected CS Code
H8004 EPSG Vertical CS Name
H8005 EPSG Vertical CS Code
H8006 EPSG Database Version
As we know, co-ordinate systems may be two- or three- dimensional.
A vertical co-ordinate system is one-dimensional.
For the P1, P2 and P5 formats:
the H8002, H8003 and H8006 records are required when latitude, longitude, easting and northing but no height or depth are given;
the H8002, H8003, H8004, H8005 and H8006 records are required when latitude, longitude, easting, northing and gravity related height or depth are given;
the H8000, H8001, H8002, H8003 and H8006 records are required when latitude, longitude, easting, northing and ellipsoidal height or depth are given.
For the P6 format, the H8002, H8003 and H8006 records are required.
That is the way UKOOA and the EPSG see the offshore world when it comes to positioning and exploration in the North Sea and elsewhere.
Exploration & Production Blog
If you are interested, I also write another blog on the oil and gas industry, mainly describing where exploration is occurring, the technology being used, history of a region, some geology, etc. and some aspects of the UN Convention on the Law of the Seas.
The blog is located here.
Terra ETL Blog
The Terra ETL Blog is about GIS, Open Source, Mapping, Data Warehousing and Geodesy.
For an interesting article on the co-ordinate frames and rotations (mentioned earlier in this blog), please look here.
Enjoy!
No comments:
Post a Comment